Voice Alert function might not work correctly after pressing. Memory Control Program MCP-4Aalso has been updated to Ver.1.03.
KENWOOD D72 SYNCTERM UPDATE
This update changes the TH-D72A's Menu No.13A (WX Alert) and 13B (Auto WX Scan) to Menu No.13B (WX Alert) and 13C (Auto WX Scan).
The default setting is "10.0 min" the same as the fixed value before updating the firmware. It enables editing of the destination callsign and sentences in received or sent messages and resend.ĭue to adding the "Edit" function above, disables automatic quotation when using "Reply" function.Īdds the Menu No.13A:-(Time-out Timer). Setting to "0 sec" sends an auto-reply message without delay time the same as before updating the firmware.Īdds characters "AA:" which means "Auto Answer" at the beginning of auto-reply messages' text following the recommendation in the APRS SPEC Addendum 1.1.Ĭhanges the name of the Menu No.3T1:- to, and enables the output of a beep sound when transmitting an auto-reply message as well as a beacon (position packet).Īdds "Edit" function in the APRS message menu. You can set the delay time to "0 sec", "10 sec" (default), or "30 sec". When you receive an APRS message, operating the transceiver during the delay time will cancel sending an auto-reply message. When distance to the target point or the received station is less than 1(mile/km/nm), displays two decimal places.Īdds the Menu No.3Q2:- as a new function. While charging the battery pack via the DC-IN jack, "Charging" appears on the front panel LCD instead of lighting the top panel LEDs to reduce power consumption.Įnables display of the model names "FT1D" and "FTM-400D" when received APRS position packets from the Yaesu FT1DR/E and the FTM-400DR/E.
Updated item : (Version 1.07 1.08) Įnables display of the model names "TH-D74", "FT2D", "FTM-100D" when received APRS position packets from the KENWOOD TH-D74A/E, and the Yaesu FT2DR/E, FTM-100DR/E.
Updated items : (Version 1.08 1.09) Įnables decoding of standard APRS telemetry format.(Displays telemetry packets sent from the PSAT2.)Įnables display of the model name "FT3D" when received an APRS position packet from the Yaesu FT3DR/E. Updated item : (Version 1.09 1.10) Įnables display of the model name "FTM-300D" when received an APRS position packet from the Yaesu FTM-300DR/E.
KENWOOD D72 SYNCTERM DRIVER
You can update the TH-D72A/E main firmware by connecting the TH-D72A/E to the PC by using a USB cable supplied with the TH-D72A/E.Ī virtual COM port driver needs to be installed onto the PC to use the firmware updating program with a USB cable.ĪTTENTION:Do not connect the transceiver to a PC using a USB cable before installing the virtual COM port driver. We are offering the firmware updating program to the TH-D72A/E owners. The TH-D72A/E main firmware has been updated from Version 1.09 to Version 1.10 as follows.
0 kommentar(er)
